The microfluidic support kits comprise different components necessary for running microfluidic systems. This includes tubes to bring the fluid into the chip, and silicone tubes to enable the interconnection between for example a microfluidic ChipShop fluidic platform chip and tubing, or between tubing and a syringe. Forceps can be used to stop a flow by clamping a silicone tube and syringes to fill chips manually. These small kits allow you to directly start with your microfluidic experiments without losing time searching for suitable components.

The Microfluidic Support Kit 1 simply consists of a silicone tube (ID: 0.5 mm, OD: 2.5 mm, 1m), a PTFE tube (ID: 0.5 mm, OD: 1 mm, 1m), 1 Forceps, 3 single-use syringes (10 ml), and 3 syringe adapters.

• Silicone tube (ID: 0.5 mm, OD: 2.5 mm, 1m)
• Silicone tube (ID: 0.76 mm, OD: 1.65 mm, 1m)
• PTFE tube (ID: 0.5 mm, OD: 1 mm, 1m)
• Forceps (1)
• Single-use syringes (10 ml, 3)
• Syringe adapter (3)
• Male Mini Luer fluid connectors, red, material: PP (10)
• Male Mini Luer fluid connectors, blue, material: PP (10)
• Male Mini Luer fluid connectors, opaque, material: TPE (10)
• Male Mini Luer plugs, green, material: PP (10)
• Male Mini Luer plugs, opaque, material: TPE (10)

• Microfluidic support kit 2 plus:
• Female Luer Lok compatible connectors with wide base, material: PMMA (10)
• Male Luer plugs, opaque, material: PP (10)

Comparable to the microfluidic support kits, the chip-PCR support kits enable you to directly start with your continuous-flow PCR from the fluidic side. They include tubes and mineral oil to drive the PCR. Besides this and the PCR system consisting of chip and thermocycler, only your own biological reagents are needed to start the PCR.

The PCR Support Kit 1 comprises a silicone tube (ID: 0.5 mm, OD: 2.5 mm, 1m), a PTFE tube (ID: 0.5 mm, OD: 1 mm, 1m), 1 Forceps and the mcs-oil-04.