
Schematic Drawing of Fluidic 1480
The double emuslion droplet chip Fluidic 1480 provides two droplet generator units with double-cross geometry, that have varying channel/nozzle sizes at the second cross. It comes with a specific surface coating that allows for the generation of double emulsions, such as the inclusion of droplets or cells deriving from the first channel intersection in a further droplet shell at the second channel intersection. Each unit consists of a two crossings, each with a flow-focusing geometry, that are connected by a meander channel to generate W/O/W emulsions in a single step. To generate water-in-oil droplets in an aqueous continuous liquid, the chips are provided with a partially hydrophilic coating. However, this chip can also be used without pretreatment to mix two aqueous phases through the meander structures and to generate W/W/O droplets. Fluidic 1480 features standard Mini Luer interfaces to seamlesly connect to a pump system of choice. For double emulsion experiments, at least three individual pump channels are required.
Lid Thickness
Topas: 140 µm
PC: 175 µm
Schematic Drawing of Fluidic 1480
Dimensions of Fluidic 1480
Detail A and B of Fluidic 1480
Details C and D of Fluidic 1480
10002061
W/W/O
Topas
Untreated – hydrophobic surface
42.20€ per Chip
34.40€ per Chip
26.10€ per Chip
10002062
W/W/O
PC
Untreated – hydrophobic surface
42.20€ per Chip
34.40€ per Chip
26.10€ per Chip
10002106
W/O/W
Topas
Treated – Partial surface treatment
67.80€ per Chip
51.20€ per Chip
36.90€ per Chip
10002107
W/O/W
PC
Treated – Partial surface treatment
67.80€ per Chip
51.20€ per Chip
36.90€ per Chip