The mp‑advance Kit is your turnkey microfluidic platform. With six BP7‑Tubing micropumps, every driver option (mp‑Driver, mp‑Lowdriver, mp‑Highdriver, mp‑Highdriver4), and the mp‑Multiboard2, you can run complex workflows out of the box. Add precise control with a flow sensor, pressure sensor, two active valves and a microfluidic chip—perfect for sequencing, dosing and closed‑loop control.

Key Features of mp-advance Kit:

• All‑in‑one system: pumps, drivers, sensors, valves, chip, PSU
• Multi‑pump control via mp‑Multiboard2 (ESP32) and GUI
• Closed‑loop ready with flow and pressure feedback
• On‑board valve actuation using mp‑valvedriverM (2 Memetis valves)
• Pulsation smoothing with 2× mp‑damper
• Rapid integration to chips via Chip 560 + 10 connectors

Benefits:

• Shorter time‑to‑data for complex experiments
• Maximum flexibility to map a wide flow‑rate range
• Higher process stability thanks to sensing and damping
• Fast iteration from benchtop demo to pre‑prototype
• Scalable architecture for multi‑channel applications

Areas of use:

• Assay automation & sample preparation
• Organ‑on‑chip and perfusion studies
• Reagent dosing, mixing, recirculation
• µ‑reactors, synthesis, analytical workflows
• Advanced prototyping and validation

Content:

• 6 x The Bartels Pump | BP7 – Tubing
• 1 x mp-Multiboard2 Evaluation Board (ESP32) incl. cable connectors
• 1 x mp-Lowdriver Pump Driver
• 1 x mp-Highdriver Pump Driver
• 1 x mp-Driver Pump Driver
• 1 x mp-Highdriver4 Pump Driver
• 1 x Sensirion SLF3S-1300F Flow Sensor
• 2 x mp-damper Pulsation Damper
• 1 x Pressure sensor
• 1 x mp-valvedriverM + active memetis valves (set)
• 1 x Straight Channel Chip 560 (microfluidic ChipShop)
• 10 x Male Mini Luer Connector (microfluidic ChipShop)
• 1 x Tygon tubing ID 1.3 mm
• 1 x Micro-USB cable
• 1 x USB-C power supply
• 10 x mp-hc Hose Clamps
• 1 x Syringe with Luer-to-Barb adapter