Slow Motion Droplet Generator - 11 µm to 44 µm nozzles - Fluidic 1750
search
  • Slow Motion Droplet Generator - 11 µm to 44 µm nozzles - Fluidic 1750
  • Slow Motion Droplet Generator - 11 µm to 44 µm nozzles - Fluidic 1750
  • Slow Motion Droplet Generator - 11 µm to 44 µm nozzles - Fluidic 1750
  • Slow Motion Droplet Generator - 11 µm to 44 µm nozzles - Fluidic 1750
  • Slow Motion Droplet Generator - 11 µm to 44 µm nozzles - Fluidic 1750
  • Slow Motion Droplet Generator - 11 µm to 44 µm nozzles - Fluidic 1750
  • Slow Motion Droplet Generator - 11 µm to 44 µm nozzles - Fluidic 1750

Description

Droplet generator chip Fluidic 1750 features eight droplet generator units with nozzle sizes between 11 and 44 μm. The continuous and dispersed phase are introduced through one Mini Luer inlet each. Therefore, operation of one unit of Fluidic 1750 requires a microfluidic pump with the ability to control two individual flows, one for the continuous and one for the dispersed phase.

The channels leading to the nozzle are very narrow, allowing for the application of extremely low flow rates. 

To learn more about droplet generation check our droplet generation booklet in the attachments or watch the video below.

Slow Motion Droplet Generator 11 µm to 44 µm nozzles Fluidic 1750

Droplet generator chip Fluidic 1750 provides eight droplet generator units with nozzle sizes between 11 and 44 μm.

€42.20 / unit
€34.40 / unit from 10 units
€26.10 / unit from 100 units
Quantity
favorite_border Add To Wishlist

favorite_border favorite
Reference
10002219
Application
Droplet generation
Usage Statement
For R&D use only, Single use
Fluidic
1750
Material
PC
Material chip body
Mcs-PC 33
Material chip lid
Mcs-foil 042 (PC, 175 µm; Tg 145°C)
Color
Transparent
Interface type
Mini luer
Surface treatment
Not treated
Membrane
No membrane
Pieces per unit
1

Description

Droplet generator chip Fluidic 1750 features eight droplet generator units with nozzle sizes between 11 and 44 μm. The continuous and dispersed phase are introduced through one Mini Luer inlet each. Therefore, operation of one unit of Fluidic 1750 requires a microfluidic pump with the ability to control two individual flows, one for the continuous and one for the dispersed phase.

The channels leading to the nozzle are very narrow, allowing for the application of extremely low flow rates. 

To learn more about droplet generation check our droplet generation booklet in the attachments or watch the video below.

You might also like