Simultaneous Droplet Generator - 20 µm to 50 µm nozzles - Fluidic 1751
search
  • Simultaneous Droplet Generator - 20 µm to 50 µm nozzles - Fluidic 1751
  • Simultaneous Droplet Generator - 20 µm to 50 µm nozzles - Fluidic 1751
  • Simultaneous Droplet Generator - 20 µm to 50 µm nozzles - Fluidic 1751

Description

Droplet generator chip Fluidic 1751 features eight droplet generator units on one chip. 

The continuous phase and dispersed phase are each introduced through one inlet featuring Mini Luer interfaces. The continuous phase runs through the long channel while the dispersed phase runs through the shorter channels and splits into five or ten sub-channels. Therefore, operation of one unit of Fluidic 1751 requires a microfluidic pump with the ability to control two individual flows, while at the same time allowing the generation of the five or ten-fold number of droplets compared to droplet generators with one nozzle.

The nozzle sizes vary between the units.

  • Unit 1: 20µm nozzle
  • Unit 2: 20µm nozzle
  • Unit 3: 20µm nozzle
  • Unit 4: 30 µm nozzle
  • Unit 5: 30 µm nozzle
  • Unit 6: 40 µm nozzle
  • Unit 7: 50 µm nozzle
  • Unit 8: 50 µm nozzle

The generated droplets can be collected in a vial or droplet storage chip connected to the outlet of the long channel.

To learn more about droplet generation check our droplet generation booklet in the attachments or watch the video below.

Simultaneous Droplet Generator 20 µm to 50 µm nozzles Fluidic 1751

Simultaneous droplet generator chip Fluidic 1751 provides eight droplet generator units with nozzle size of 20 to 50 μm for high throughput droplet production.

Material
€42.20 / unit
€34.40 / unit from 10 units
€26.10 / unit from 100 units
Quantity
favorite_border Add To Wishlist

favorite_border favorite
Reference
10002220
Application
Droplet generation
Usage Statement
For R&D use only, Single use
Fluidic
1751
Material
Topas
Material chip body
Mcs-COC 16
Material chip lid
Mcs-foil 011 (Topas, 140 µm, Tg 78°C)
Color
Transparent
Interface type
Mini luer
Surface treatment
Not treated
Membrane
No membrane
Pieces per unit
1

Description

Droplet generator chip Fluidic 1751 features eight droplet generator units on one chip. 

The continuous phase and dispersed phase are each introduced through one inlet featuring Mini Luer interfaces. The continuous phase runs through the long channel while the dispersed phase runs through the shorter channels and splits into five or ten sub-channels. Therefore, operation of one unit of Fluidic 1751 requires a microfluidic pump with the ability to control two individual flows, while at the same time allowing the generation of the five or ten-fold number of droplets compared to droplet generators with one nozzle.

The nozzle sizes vary between the units.

  • Unit 1: 20µm nozzle
  • Unit 2: 20µm nozzle
  • Unit 3: 20µm nozzle
  • Unit 4: 30 µm nozzle
  • Unit 5: 30 µm nozzle
  • Unit 6: 40 µm nozzle
  • Unit 7: 50 µm nozzle
  • Unit 8: 50 µm nozzle

The generated droplets can be collected in a vial or droplet storage chip connected to the outlet of the long channel.

To learn more about droplet generation check our droplet generation booklet in the attachments or watch the video below.

You might also like