Droplet Generator with Single Cross - 38 µm nozzles - Fluidic 537
search
  • Droplet Generator with Single Cross - 38 µm nozzles - Fluidic 537
  • Droplet Generator with Single Cross - 38 µm nozzles - Fluidic 537
  • Fluidic 537 connected to tubing using Luer connectors.
  • Droplet Generator with Single Cross - 38 µm nozzles - Fluidic 537
  • Droplet Generator with Single Cross - 38 µm nozzles - Fluidic 537
  • Droplet Generator with Single Cross - 38 µm nozzles - Fluidic 537

Description

The droplet generator with design number 537 possesses a classic flow focusing geometry, perfectly suited to generate simple droplets. With four identical droplet generator units on one microfluidic chip, this device is ideal for anyone who wants to try or compare multiple experimental setups, without the need of ordering a new chip for every experiment. Operation of one unit of Fluidic 537 requires a microfluidic pump with the ability to control two individual flows, one for the continuous and one for the disperse phase. Please be aware that this chip is one of the few droplet generators devices with Luer interfaces and appropriate Luer compatible accessories are required.

To learn more about droplet generation check the droplet generation booklet in the attachments or watch the video below.

Droplet Generator with Single Cross 38 µm nozzles Fluidic 537

Droplet generator chips Fluidic 537 provides four identical droplet generator units with a nozzle size of 38 μm on one chip.

Material
Surface Treatment
€42.20 / unit
€34.40 / unit from 10 units
€26.10 / unit from 100 units
Quantity
favorite_border Add To Wishlist

favorite_border favorite
Reference
10000466
Application
Droplet generation
Usage Statement
For R&D use only, Single use
Fluidic
537
Material
Topas
Material chip body
Mcs-COC 16
Material chip lid
Mcs-foil 011 (Topas, 140 µm, Tg 78°C)
Color
Transparent
Interface type
Luer
Surface treatment
Not treated
Membrane
No membrane
Pieces per unit
1

Description

The droplet generator with design number 537 possesses a classic flow focusing geometry, perfectly suited to generate simple droplets. With four identical droplet generator units on one microfluidic chip, this device is ideal for anyone who wants to try or compare multiple experimental setups, without the need of ordering a new chip for every experiment. Operation of one unit of Fluidic 537 requires a microfluidic pump with the ability to control two individual flows, one for the continuous and one for the disperse phase. Please be aware that this chip is one of the few droplet generators devices with Luer interfaces and appropriate Luer compatible accessories are required.

To learn more about droplet generation check the droplet generation booklet in the attachments or watch the video below.

You might also like