Droplet Generator with Single Cross - 80 µm nozzles - Fluidic 912
search
  • Droplet Generator with Single Cross - 80 µm nozzles - Fluidic 912
  • Droplet Generator with Single Cross - 80 µm nozzles - Fluidic 912
  • One droplet generation unit of Fluidic 912 is connected to tubing.
  • Droplet Generator with Single Cross - 80 µm nozzles - Fluidic 912
  • Droplet Generator with Single Cross - 80 µm nozzles - Fluidic 912
  • Droplet Generator with Single Cross - 80 µm nozzles - Fluidic 912
  • Droplet Generator with Single Cross - 80 µm nozzles - Fluidic 912

Description

Droplet generator chip Fluidic 912 features eight identical droplet generator units with a nozzle size of 80 μm on one chip. Droplet generator chips Fluidic 912 provides eight identical droplet generator units with a nozzle size of 80 μm on one chip. The continuous phase is introduced through one Mini Luer inlet, which separates into two channels. Operation of one unit of Fluidic 912 therefore requires a microfluidic pump with the ability to control two individual flows, one for the continuous and one for the disperse phase.

To learn more about droplet generation check our droplet generation booklet in the attachments or watch the video below.

Droplet Generator with Single Cross 80 µm nozzles Fluidic 912

Droplet generator chip Fluidic 912 provides eight identical droplet generator units with a nozzle size of 80 μm on one chip.

Material
Surface Treatment
€42.20 / unit
€34.40 / unit from 10 units
€26.10 / unit from 100 units
Quantity
favorite_border Add To Wishlist

favorite_border favorite
Reference
10001985
Application
Droplet generation
Usage Statement
For R&D use only, Single use
Fluidic
912
Material
Topas
Material chip body
Mcs-COC 16
Material chip lid
Mcs-foil 011 (Topas, 140 µm, Tg 78°C)
Color
Transparent
Interface type
Mini luer
Surface treatment
Not treated
Membrane
No membrane
Pieces per unit
1

Description

Droplet generator chip Fluidic 912 features eight identical droplet generator units with a nozzle size of 80 μm on one chip. Droplet generator chips Fluidic 912 provides eight identical droplet generator units with a nozzle size of 80 μm on one chip. The continuous phase is introduced through one Mini Luer inlet, which separates into two channels. Operation of one unit of Fluidic 912 therefore requires a microfluidic pump with the ability to control two individual flows, one for the continuous and one for the disperse phase.

To learn more about droplet generation check our droplet generation booklet in the attachments or watch the video below.

You might also like