Tube Tuck Mini Luer Connector - for 1/32 tubing - Fluidic 997
search
  • Tube Tuck Mini Luer Connector - for 1/32 tubing - Fluidic 997
  • Tube Tuck Mini Luer Connector - for 1/32 tubing - Fluidic 997
  • Tube Tuck Mini Luer Connector - for 1/32 tubing - Fluidic 997
  • Tube Tuck Mini Luer Connector - for 1/32 tubing - Fluidic 997
  • Tube Tuck Mini Luer Connector - for 1/32 tubing - Fluidic 997
  • Tube Tuck Mini Luer Connector - for 1/32 tubing - Fluidic 997
  • Tube Tuck Mini Luer Connector - for 1/32 tubing - Fluidic 997
  • Tube Tuck Mini Luer Connector - for 1/32 tubing - Fluidic 997

Description

The tube tuck connector can be used to directly connect a female Mini Luer interface (on chip) with tubing, simply by inserting the tubing into the receiving end of the connector. No other accessories, silicone sleeve or alike are needed.

We recommend the use of PEEK capillary tubing (ID: 0.508 mm (0.02"), OD: 0.794 mm (1/32") or PTFE Tubing (ID 0.5 mm, OD 1.0 mm). These combinations will withstand at least 3.2 bar applied pressure without the occurrence of leakages.

Tube Tuck Mini Luer Connector for 1/32 tubing Fluidic 997

The tube tuck connector for Mini Luer interfaces is certainly the easiest tool for interfacing a chip. Insert a matching tube, apply pressure of up to 3.2 bar and you are ready to go!

Color
€19.00 / unit
€14.00 / unit from 5 units
€9.40 / unit from 10 units
€7.40 / unit from 20 units
€6.90 / unit from 100 units
Quantity
favorite_border Add To Wishlist

favorite_border favorite
Reference
10001764
Usage Statement
For R&D use only, Single use
Fluidic
997
Material
TPE
Material chip body
Mcs-TPE 21
Color
Green
Interface type
Mini luer
Pieces per unit
10

Description

The tube tuck connector can be used to directly connect a female Mini Luer interface (on chip) with tubing, simply by inserting the tubing into the receiving end of the connector. No other accessories, silicone sleeve or alike are needed.

We recommend the use of PEEK capillary tubing (ID: 0.508 mm (0.02"), OD: 0.794 mm (1/32") or PTFE Tubing (ID 0.5 mm, OD 1.0 mm). These combinations will withstand at least 3.2 bar applied pressure without the occurrence of leakages.

You might also like