Tube Tuck Mini Luer Connector - for 1/16 tubing - Fluidic 1579
search
  • Tube Tuck Mini Luer Connector - for 1/16 tubing - Fluidic 1579
  • Tube Tuck Mini Luer Connector - for 1/16 tubing - Fluidic 1579
  • Tube Tuck Mini Luer Connector - for 1/16 tubing - Fluidic 1579
  • Tube Tuck Mini Luer Connector - for 1/16 tubing - Fluidic 1579
  • Tube Tuck Mini Luer Connector - for 1/16 tubing - Fluidic 1579

Description

The tube tuck connector can be used to directly connect a female Mini Luer interface (on chip) with tubing, simply by inserting the tubing into the receiving end of the connector. No other accessories, silicone sleeve or alike are needed.

We recommend the use of PEEK capillary tubing (ID: 0.508 mm (0.02"), OD: 1.587 mm (1/16"). This particular combination can endure an applied pressure of max. 3.2 bar without experiencing any leaks.

Tube Tuck Mini Luer Connector for 1/16 tubing Fluidic 1579

The tube tuck connector for Mini Luer interfaces is certainly the easiest tool for interfacing a chip. Insert a matching tube, apply pressure of up to 3.2 bar and you are ready to go!

€19.00 / unit
€14.00 / unit from 5 units
€9.40 / unit from 10 units
€7.40 / unit from 20 units
€6.90 / unit from 100 units
Quantity
favorite_border Add To Wishlist

favorite_border favorite
Reference
10002010
Usage Statement
For R&D use only, Single use
Fluidic
1579
Material
TPE
Material chip body
Mcs-TPE 21
Material chip lid
No foil
Color
Blue
Interface type
Mini Luer interface
Surface treatment
Not treated
Membrane
No membrane
Pieces per unit
10

Description

The tube tuck connector can be used to directly connect a female Mini Luer interface (on chip) with tubing, simply by inserting the tubing into the receiving end of the connector. No other accessories, silicone sleeve or alike are needed.

We recommend the use of PEEK capillary tubing (ID: 0.508 mm (0.02"), OD: 1.587 mm (1/16"). This particular combination can endure an applied pressure of max. 3.2 bar without experiencing any leaks.

You might also like