Tube Tuck Luer Connector - for 1/16 tubing - Fluidic 1581
search
  • Tube Tuck Luer Connector - for 1/16 tubing - Fluidic 1581
  • Tube Tuck Luer Connector - for 1/16 tubing - Fluidic 1581
  • Tube Tuck Luer Connector - for 1/16 tubing - Fluidic 1581
  • Tube Tuck Luer Connector - for 1/16 tubing - Fluidic 1581
  • Tube Tuck Luer Connector - for 1/16 tubing - Fluidic 1581
  • Tube Tuck Luer Connector - for 1/16 tubing - Fluidic 1581

Description

The tube tuck connector can be used to directly connect a female Luer interface (on chip) with tubing, simply by inserting the tubing into the receiving end of the connector. No other accessories, silicone sleeve or alike are needed.

We recommend the use of PEEK capillary tubing (ID: 0.508 mm (0.02"), OD: 1.587 mm (1/16"). This particular combination can endure an applied pressure of max. 3.2 bar without experiencing any leaks.

Tube Tuck Luer Connector for 1/16 tubing Fluidic 1581

The tube tuck connector for Luer interfaces is certainly the easiest tool for interfacing a chip. Insert a matching tube, apply pressure of up to 3.2 bar and you are ready to go!

€25.00 / unit
€14.40 / unit from 10 units
Quantity
favorite_border Add To Wishlist

favorite_border favorite
Reference
10002012
Usage Statement
For R&D use only, Single use
Fluidic
1581
Material
TPE
Material chip body
Mcs-TPE 21
Material chip lid
No foil
Color
Blue
Interface type
Luer interface
Surface treatment
Not treated
Membrane
No membrane
Pieces per unit
10

Description

The tube tuck connector can be used to directly connect a female Luer interface (on chip) with tubing, simply by inserting the tubing into the receiving end of the connector. No other accessories, silicone sleeve or alike are needed.

We recommend the use of PEEK capillary tubing (ID: 0.508 mm (0.02"), OD: 1.587 mm (1/16"). This particular combination can endure an applied pressure of max. 3.2 bar without experiencing any leaks.

You might also like