Cross-Flow Membrane Chip - 3D printing application - Fluidic 1754
search
  • Cross-Flow Membrane Chip - 3D printing application - Fluidic 1754
  • Cross-Flow Membrane Chip - 3D printing application - Fluidic 1754
  • Cross-Flow Membrane Chip - 3D printing application - Fluidic 1754
  • Cross-Flow Membrane Chip - 3D printing application - Fluidic 1754
  • Cross-Flow Membrane Chip - 3D printing application - Fluidic 1754
  • Cross-Flow Membrane Chip - 3D printing application - Fluidic 1754

Description

The cross-flow membrane chip Fluidic 1754 possesses two independent units. Each unit features two chambers, separated by a membrane. Each chamber has one in- and one outlet. The chamber above the membrane is open for easy access. A ridge around the top-sided membrane area carries little pillars to support potential 3D-printed structures. Users can print the structures directly into the open chamber and then close the chamber themselves. To close the chamber, the protective foil on top of the chip can be removed, revealing a double sided-adhesive tape. This chip can be ordered with or without pre-cut cover lid (closing substrate). The cover lid enables you to seal the chamber easily.

The chip is available with different membrane types, differing e.g. in pore size. To equip the chip with custom membranes, please contact Inquiries@microfluidic-ChipShop.com.

Fluidic 1754 can be used e.g. for cell culture experiments, where cells, such as epithelial cells are co-cultured. 

Attention: Extended exposure to ethanol can impact chip quality and membrane integrity and is therefore not recommended

Cross-Flow Membrane Chip 3D printing application Fluidic 1754

The cross-flow membrane chip Fluidic 1754 is a versatile microfluidic tool for organ-on-chip experiments and specifically well suited for 3D-printing applications in the chamber area. We offer a choice of purchasing the open chip with foil for sealing or without.

Surface Treatment
Membrane pore size
Configuration
€85.30 / unit
€69.30 / unit from 10 units
€48.30 / unit from 100 units
Quantity
favorite_border Add To Wishlist

favorite_border favorite
Reference
10002206
Design element
Membrane
Application
Cell culture, Organ-on-Chip
Usage Statement
For R&D use only, Single use
Fluidic
1754
Material
Topas
Material chip body
Mcs-COC 16
Material chip lid
Mcs-foil 011 (Topas, 140 µm, Tg 78°C)
Color
Transparent
Interface type
Mini luer
Surface treatment
Not treated
Membrane
Mcs-membrane 156 (0.2 µm pores, PET, transparent)
Pieces per unit
1

Description

The cross-flow membrane chip Fluidic 1754 possesses two independent units. Each unit features two chambers, separated by a membrane. Each chamber has one in- and one outlet. The chamber above the membrane is open for easy access. A ridge around the top-sided membrane area carries little pillars to support potential 3D-printed structures. Users can print the structures directly into the open chamber and then close the chamber themselves. To close the chamber, the protective foil on top of the chip can be removed, revealing a double sided-adhesive tape. This chip can be ordered with or without pre-cut cover lid (closing substrate). The cover lid enables you to seal the chamber easily.

The chip is available with different membrane types, differing e.g. in pore size. To equip the chip with custom membranes, please contact Inquiries@microfluidic-ChipShop.com.

Fluidic 1754 can be used e.g. for cell culture experiments, where cells, such as epithelial cells are co-cultured. 

Attention: Extended exposure to ethanol can impact chip quality and membrane integrity and is therefore not recommended

You might also like