Adhesive Straight Channel Chip - H 200+140 µm, W 1000 µm channel - Fluidic 152
search
  • Adhesive Straight Channel Chip - H 200+140 µm, W 1000 µm channel - Fluidic 152
  • Adhesive Straight Channel Chip - H 200+140 µm, W 1000 µm channel - Fluidic 152
  • Adhesive Straight Channel Chip - H 200+140 µm, W 1000 µm channel - Fluidic 152

Description

The adhesive straight channel chip Fluidic 152 is ideal for many microfluidic experiments where a simple flow cell with a wide channel is required. With 16 identical channels, multiple experiments can be performed with one individual chip. With direct access to the microstructures, experimental preparation steps are no longer a challenge (e.g. spotting, pre-treatment, immunoassays and much more)

Each channel features the following dimensions:

  • Channel depth: 200+140 µm
  • Channel width: 1000 µm
  • Channel length: 18 mm

The back of the chip is covered with a double-sided adhesive (140 µm high). After removing the protective foil from the adhesive, the user can close the channel with a microscope slide or pre-cut foil (not included).

Note: The technical datasheet presents the dimensions of the injection molded chip body only and doesn't account for the depth added by the double-sided adhesive tape.

Watch this video for more information on assembling your open channel chip.

Adhesive Straight Channel Chip H 200+140 µm, W 1000 µm channel Fluidic 152

The adhesive straight channel chip Fluidic 152 is a versatile flow cell for any microfluidic experiment or assay development. The chip features 16 identical channels with direct access.

€48.50 / unit
€36.50 / unit from 10 units
€28.60 / unit from 100 units
Quantity
favorite_border Add To Wishlist

favorite_border favorite
Reference
10002484
Design element
Channel, Tape
Usage Statement
For R&D use only, Single use
Fluidic
152
Material
Topas
Material chip body
Mcs-COC 13
Material chip lid
Mcs-foil 008 (140 µm) double-sided adhesive tape
Color
Transparent
Interface type
Mini luer
Surface treatment
Not treated
Membrane
No membrane
Pieces per unit
1

Description

The adhesive straight channel chip Fluidic 152 is ideal for many microfluidic experiments where a simple flow cell with a wide channel is required. With 16 identical channels, multiple experiments can be performed with one individual chip. With direct access to the microstructures, experimental preparation steps are no longer a challenge (e.g. spotting, pre-treatment, immunoassays and much more)

Each channel features the following dimensions:

  • Channel depth: 200+140 µm
  • Channel width: 1000 µm
  • Channel length: 18 mm

The back of the chip is covered with a double-sided adhesive (140 µm high). After removing the protective foil from the adhesive, the user can close the channel with a microscope slide or pre-cut foil (not included).

Note: The technical datasheet presents the dimensions of the injection molded chip body only and doesn't account for the depth added by the double-sided adhesive tape.

Watch this video for more information on assembling your open channel chip.

You might also like