Adhesive Waste Chamber Chip - Double Channel - Fluidic 272
search
  • Adhesive Waste Chamber Chip - Double Channel - Fluidic 272
  • Adhesive Waste Chamber Chip - Double Channel - Fluidic 272
  • Adhesive Waste Chamber Chip - Double Channel - Fluidic 272

Description

The adhesive waste chamber chip features two channels, two waste chambers and Mini Luer interfaces.

Each channel features the following dimensions:

  • Channel depth: 200 µm + 140 µm
  • Channel width: 2.5 mm
  • Channel length: 26 mm

The waste chamber has venting holes and following dimensions:

  • Chamber height: 4.1 mm
  • Chamber width: 10.3 mm
  • Chamber length: 14.5 mm

The back of the chip is covered with a double-sided adhesive (140 µm high) from the top. After removing the protective foil from the adhesive, the user can close the channel with a substrate of liking e.g. pre-cut foil (not included).

Watch this video for more information on assembling your open channel chip.

Adhesive Waste Chamber Chip Double Channel Fluidic 272

This adhesive waste chamber chip features two straight channels and two waste chambers.

Material
€52.50 / unit
€40.50 / unit from 10 units
Quantity
favorite_border Add To Wishlist

favorite_border favorite
Reference
10001870
Design element
Channel, Tape
Usage Statement
For R&D use only, Single use
Fluidic
272
Material
PMMA
Material chip body
Mcs-PMMA 08
Material chip lid
Mcs-foil 147 (PMMA, 175 µm, Tg 109°C)
Color
Transparent
Interface type
Mini luer
Surface treatment
Not treated
Membrane
Mcs-membrane 058 (0.45 µm pore size, PTFE)
Pieces per unit
1

Description

The adhesive waste chamber chip features two channels, two waste chambers and Mini Luer interfaces.

Each channel features the following dimensions:

  • Channel depth: 200 µm + 140 µm
  • Channel width: 2.5 mm
  • Channel length: 26 mm

The waste chamber has venting holes and following dimensions:

  • Chamber height: 4.1 mm
  • Chamber width: 10.3 mm
  • Chamber length: 14.5 mm

The back of the chip is covered with a double-sided adhesive (140 µm high) from the top. After removing the protective foil from the adhesive, the user can close the channel with a substrate of liking e.g. pre-cut foil (not included).

Watch this video for more information on assembling your open channel chip.

You might also like